Sam Prompt-Interval - Cisco CRS User Manual

sam prompt-interval

sam prompt-interval
To set the interval that the Software Authentication Manager (SAM) waits after prompting the user for input
when it detects an abnormal condition at boot time and to determine how the SAM responds when it does not
receive user input within the specified interval, use the sam prompt-interval command. To reset the prompt
interval and response to their default values, use the no form of this command.
sam prompt-interval time-interval {proceed| terminate}
no sam prompt-interval time-interval {proceed| terminate}
Syntax Description
time-interval
proceed
terminate
Command Default
The default response is for the SAM to wait 10 seconds and then terminate the authentication task.
Command Modes
Global configuration
Command History
Release
Release 2.0
Usage Guidelines
Use the sam prompt-interval command to control the action taken when the system detects an exception
condition, such as an expired certificate during initialization of the SAM at boot time. The following message
appears when the software detects the abnormal condition of a certificate authority (CA) certificate expired:
SAM detects expired CA certificate. Continue at risk (Y/N):
The SAM waits at the prompt until you respond or the time interval controlled by the sam prompt-interval
command expires, whichever is the earlier event. If you respond "N" to the prompt, the boot process is allowed
to complete, but no packages can be installed.
The following message appears when the software detects the abnormal condition of a Code Signing Server
(CSS) certificate expired:
SAM detects CA certificate (Code Signing Server Certificate Authority) has expired. The
validity period is Oct 17, 2000 01:46:24 UTC - Oct 17, 2015 01:51:47 UTC. Continue at risk?
(Y/N) [Default:N w/in 10]:
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
238
Prompt time, in the range from 0 to 300 seconds.
Causes the SAM to respond as if it had received a "yes" when the prompt
interval expires.
Causes the SAM to respond as if it had received a "no" when the prompt
interval expires.
Modification
This command was introduced.
Software Authentication Manager Commands
OL-24740-01