Cloning The Programmed Data - Radio Shack PRO-97 Manual

Beyond the Basics

cloning the programmed data

You can transfer the programmed data to and from another
PRO-97 scanner using an optional connecting cable with
1/8-inch (3.5 mm) phone plugs on both ends (not supplied,
available at your local RadioShack store).
"CLONE MODE" Incorrect Model appears if the scanner
Notes Notes
receives data from another scanner other than a PRO-97.
Follow these steps to clone the data.
1. Turn on both scanners.
2. Connect the connecting cable to each scanner's PC/IF
jack. **CLONE MODE** Press UP to send Remove cable to exit.
appears.
3. Press
appears.
4. Press 1 to send the data to the other unit or press any
other key to cancel the operation.
The scanner sends the data. To exit the clone mode, remove
the cable.
. Confi rm to send data? 1 -> YES Press other key for NO.
e
64