Changing The Display Contrast; Cloning The Programmed Data - Radio Shack PRO-95 Owner's Manual

locked.
appears when you press
any key after locking the keypad.
To turn off the key lock, press
then / . The scanner
FUNC
Key unlocked
beeps three times and
appears.
C D
HANGING THE ISPLAY
C
ONTRAST
1. Press .
MANUAL
2. Press then .
FUNC 9
Down keys to set contrast.
appears.
3. Press or to select the
contrast.
4. Press to set the
ENTER
display contrast.
C
LONING THE
P D
ROGRAMMED ATA
You can transfer the programmed
data to and from another PRO-95
scanner using an optional
connecting cable with 1 /
8
phone plugs on both ends (not
supplied, available at your local
Ô
RadioShack store).
Follow these steps to clone the
data.
1. Turn on both scanners.
2. Connect the connecting cable
to each scanner's
PC/IF
*CLONE MODE* UP to send,
remove cable to exit.
appears.
Confirm send data?
3. Press .
1=YES Press other key for NO.
appears.
Use Up/
Ô
NOTE
*CLONE MODE*
Incorrect Model
appears if the
scanner receives
data from another
scanner other than a
-inch
PRO-95.
jack.
Ô
53