Using The Attenuator - Radio Shack PRO-95 Owner's Manual

might have to change the receive
mode.
To change the receive mode,
repeatedly press
receive mode changes as follows:
AM
FM
MO
Motorola Trunking System (with a
4- or 5-digit ID code)
ED
EDACS Trunking System (with
4-digit decimal ID code or 5-digit
AFS code)
U
To reduce interference or noise
caused by strong signals, you can
reduce the scanner's sensitivity to
these signals.
Ô Ô
NOTE
There are two attenuator modes in
MO (MOT) and ED
your scanner. One is normal
modes are not
attenuator mode in which you set
available when the
the attenuator in each channel or
scanner tunes up or
each band/group in the search
down through the
and tune mode. The other is global
frequency ranges in
which the trunking
mode in which you set the
operation is not used.
attenuator only once. This setting
is applied all the time in every
mode.
Press
attenuator while the channel
number is indicated or while the
scanner is searching through
bands/groups. When the
attenuator is on,
seventh digit in the top line.
50
. The
MODE
— accesses the AM mode
— accesses the FM mode
— accesses the FM Mode,
— accesses the FM Mode,
Ô
A
SING THE TTENUATOR
to turn on or off the
ATT
A
appears at the