Locking Out Frequencies; Priority - Radio Shack PRO-90 Owner's Manual

20-520.fm Page 28 Wednesday, August 4, 1999 3:06 PM
Note: You can still manually select locked-out channels.
To remove the lockout from a channel, manually select
the channel and hold down
from the display.
To unlock all channels in the banks that are turned on,
press to stop scanning, then hold down
MANUAL
the scanner beeps twice.

Locking Out Frequencies

To lock out a frequency during a limit search or service
bank scan, press when the scanner stops on the fre-
L/O
quency. The scanner locks out the frequency, then con-
tinues searching. To lock out a frequency manually,
manually select the frequency and hold down
L/O appears.
Notes:
• The scanner does not display locked-out frequen-
cies during a search.
• You can lock out as many as 20 frequencies during
a search. If you try to lock out more than 20 frequen-
cies, the first locked-out frequency is automatically
unlocked.
Follow these steps to remove the lockout from a fre-
quency.
1. During a search, select the frequency you want to
remove the lockout from.
2. Press . L/O disappears from the display.
L/O
To remove the lockout from all frequencies, while
searching, hold down
L/O
(about 2 seconds).

PRIORITY

The priority feature lets you scan through channels and
still not miss important or interesting calls on specific
channels. You can program one stored channel in each
bank as a priority channel (for up to a total of 10 stored
channels). As the scanner scans the bank, if the priority
feature is turned on, the scanner checks the priority
channels for activity every 2 seconds.
28
until L/O disappears
L/O
L/O
L/O
until the scanner beeps twice
until
until