Storing Known Frequencies Into Channels - Radio Shack PRO-90 Owner's Manual

20-520.fm Page 21 Wednesday, August 4, 1999 3:06 PM
Notes:
• If you have not stored frequencies into any chan-
nels, the scanner does not scan.
• If the scanner picks up unwanted, partial, or very
weak transmissions, turn
to decrease the scanner's sensitivity to these sig-
nals. If you want to listen to a weak or distant sta-
tion, turn clockwise.
SQUELCH
• If is adjusted so you always hear a hissing
SQUELCH
sound, the scanner does not scan properly.
STORING KNOWN FREQUENCIES
INTO CHANNELS
Good references for active frequencies are the Ra-
dioShack "Police Call Guide including Fire and Emer-
gency Services," "Official
Directory," and "Maritime Frequency Directory." We up-
date these directories every year, so be sure to get a
current copy.
Note: To store trunking system frequencies, see "Pro-
gramming Trunked Frequencies" on Page 34.
Follow these steps to store frequencies into channels.
1. Press , enter the channel number where you
MANUAL
want to store a frequency, then press
The channel number appears.
2. Use the number keys and
(including the decimal point) you want to store.
counterclockwise
SQUELCH
Aeronautical Frequency
again.
MANUAL
•
to enter the frequency
21