Invacare RPS350–1E User Manual page 42

Invacare® Stand Assist
WARNING!
– NEVER adjust the knee pad while patient is in
the standing position.
– NEVER try to adjust the knee pad while the
lift is moving.
– ALWAYS make sure that the adjustment pins are
engaged in corresponding height adjustment
holes before use.
1. Pick a height setting that will be comfortable to the
patient and provide the necessary support.
The knee pad should be positioned so that the
knee portion of the leg is in contact with the
pad.
2. Using both hands, pull both adjustment pins outward at
the same time.
3. Position the knee pad to the desired height and release
adjustment pins into the corresponding alignment holes.
4. Check to make sure that both pins are engaged.
42 1078985-I