Usage; Introduction; Closing/Opening Legs; Closing/Opening Manual Legs - Invacare RPS350–1E User Manual

Stand assist
Hide thumbs Also See for RPS350–1E:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

4 Usage

4.1 Introduction

The operation of the patient lift is an easy and safe
procedure.
Before using the lift with a patient, refer to the
following procedures for safety information and
instruction:
2.2 Operating Information, page 8
5.3 Lifting the Patient, page 27

4.2 Closing/Opening Legs

WARNING!
Risk of Injury
The lift could tip and endanger the patient and
assistants.
– The legs of the lift must be in the maximum
open position for optimum stability and safety.
If it is necessary to close the legs of the lift to
maneuver the lift under a bed, close the legs
of the lift only as long as it takes to position
the lift over the patient and lift the patient off
the surface of the bed. When the legs of the
lift are no longer under the bed, return the
legs of the lift to the maximum open position.
1078985-I

4.2.1 Closing/Opening Manual Legs

The shifter handle is used to open or close the legs of the
base for stability when lifting a patient.
Refer to the safety information in 4.2 Closing/Opening
Legs, page 17 before performing this procedure.
A = Shifter Handle
1. To close the legs:
Pull the shifter handle
OUT and away from the
stand-up lift and then to
your LEFT until it LOCKS in
the notch of the bracket.
Left is determined
by standing behind
the stand-up lift
facing towards the
front casters.
2. To open the legs:
Pull the shifter handle
OUT and away from the
stand-up lift and then to
your RIGHT until it LOCKS
in the notch of the bracket.
Right is determined
by standing behind
the stand-up lift
facing towards the
front casters.
Usage
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rps350–1fr

Table of Contents