Toyota Tacoma 2018 Owner's Manual page 97

Settings display
Changing the settings
■
Select using the meter control switch.
1
Select an item and then set it with the center button.
2
Customizable items
■
● PCS (Pre-Collision System) (if equipped) (→P. 235)
• PCS
Select to enable/disable the PCS (Pre-Collision System) function.
• Sensitivity
Select to set up the PCS (Pre-Collision System) sensitivity.
● LDA (Lane Departure Alert) (if equipped) (→P. 249)
• LDA sensitivity
Select to set up the LDA (Lane Departure Alert) sensitivity.
• Sway warning
Select to enable/disable the Sway warning function.
• Sway warning sensitivity
Select to set up the sway warning sensitivity.
● Language
Select to change the language on the display.
● Units
Select to change the unit of measure for fuel consumption and
temperature.
● Drive information 1 through 3
Select to select up to 2 items that will be displayed on a Drive
information screen, up to 3 Drive information screens can be set.
● Pop-up display
Select to set the following pop-up displays, which may appear in
some situations, on/off.
• Instrument panel brightness adjustment display
• Route guidance display of the navigation system-linked sys-
tem
• Incoming call display of the hands-free phone system
• Shift position display (vehicles with an automatic transmission)
2. Instrument cluster
97
2