Toyota Tacoma 2018 Owner's Manual page 262

262
4-5. Using the driving support systems
Setting the vehicle speed (vehicle-to-vehicle distance control
mode)
1
Press the "ON-OFF" button to
activate the cruise control.
Radar cruise control indicator will
come on and a message will be
displayed on the multi-information
display.
Press the button again to deacti-
vate the cruise control.
If the "ON-OFF" button is pressed
and held for 1.5 seconds or more,
the system turns on in constant
speed control mode. (→P. 266)
2 Accelerate or decelerate, with
accelerator pedal operation, to
the desired vehicle speed (at or
above approximately 30 mph
[50 km/h]) and push the lever
down to set the speed.
Cruise control "SET" indicator will
come on.
The vehicle speed at the moment
the lever is released becomes the
set speed.