Toyota Tacoma 2018 Owner's Manual page 197

Stopping the engine
1
Stop the vehicle.
2
Set the parking brake (→P. 210), and shift the shift lever to P.
3
Press the engine switch.
4
Release the brake pedal and check that the display on the instru-
ment cluster is off.
Changing engine switch modes
Modes can be changed by pressing the engine switch with brake
pedal released. (The mode changes each time the switch is pressed.)
*
Off
1
The emergency flashers can be
used.
ACCESSORY mode
2
Some electrical components such
as the audio system can be used.
"ACCESSORY" will be displayed
on the multi-information display.
IGNITION ON mode
3
All electrical components can be
used.
"IGNITION ON" will be displayed
on the multi-information display.
*
: If the shift lever is in a position
other than P when turning off the
engine, the engine switch will be
turned to ACCESSORY mode, not
to off.
4-2. Driving procedures
197
4