Toyota Tacoma 2018 Owner's Manual page 214

Hide thumbs Also See for Tacoma 2018:
Table of Contents

Advertisement

214
4-3. Operating the lights and wipers
Automatic light off system
When the light switch is in
engine switch is turned to the "LOCK" position (vehicles without a smart key
system) or off (vehicles with a smart key system) and a door is opened and all
of the doors are closed. (Vehicles with a wireless remote control function: The
lights turn off immediately if
locked.)
When the light switch is in
turned to the "LOCK" position (vehicles without a smart key system) or off
(vehicles with a smart key system) and the driver's door is opened.
To turn the lights on again, turn the engine switch to the "ON" position (vehi-
cles without a smart key system) or to IGNITION ON mode (vehicles with a
smart key system), or turn the light switch off, then turn it to
If any of the doors is kept open and the engine switch is in the "LOCK" posi-
tion (vehicles without a smart key system) or off (vehicles with a smart key
system), the lights automatically turn off after 20 minutes.
Light reminder function
An alarm will sound and message will be shown on the multi-information dis-
play when the driver's door is opened with the lights are turned on and the
engine switch to the "LOCK" position (vehicles without a smart key system) or
off (vehicles with a smart key system).
Customization
Settings (e.g. light sensor sensitivity) can be changed.
(Customizable features: →P. 649)
NOTICE
To prevent battery discharge
Do not leave the lights on longer than necessary when the engine is not
running.
or
: The lights turn off 30 seconds after the
on the key is pressed while all the doors are
: The lights turn off after the engine switch is
or to
.

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents