Toyota Tacoma 2018 Owner's Manual page 553

High mounted stoplight (vehicles without a cargo lamp)
■
1
Remove the screws and
cover.
2
Remove the light bulb.
When reinstalling the outer lens,
confirm that the packing is prop-
erly seated in the groove on the
housing.
3 When installing, reverse the steps listed.
Replacing the following bulbs
■
If any of the lights listed below has burnt out, have it replaced by
your Toyota dealer.
● Parking lights (LED type)
● Daytime running lights (LED type)
● High mounted stoplight (vehicles with cargo lamp)
● Side turn signal lights (if equipped)
7-3. Do-it-yourself maintenance
553
Packing
7