Toyota Tacoma 2018 Owner's Manual page 481

Hide thumbs Also See for Tacoma 2018:

Table of Contents

Press and hold the desired

vehicle) for 2 seconds and

release) up to 3 times to

complete programming.

If the garage door opener

motor operates when the

pressed, the garage door

opener motor recognizes the

Enabling 2-way communication with a garage door (only avail-

able for compatible devices)

When enabled, 2-way communication allows you to check the sta-

tus of the opening and closing of a garage door through indicators

in your vehicle.

2-way communication is only available if the garage door opener

motor used is a compatible device. (To check device compatibility,

refer to www.HomeLink.com.)

Within 5 seconds after programming the garage door opener has

been completed, if the garage door opener motor is trained to

idly green and the light on the garage door opener motor will

blink twice, indicating that 2-way communication is enabled.

If the indicators do not flash, perform

presses of the HomeLink

Press a programmed HomeLink

Within 1 minute of pressing the HomeLink

garage door operation has stopped, press the "Learn" or "Smart"

button on the garage door opener motor. Within 5 seconds of the

establishment of 2-way communication with the garage door

opener, both garage door operation indicators in the vehicle will

flash rapidly green and the light on the garage door opener motor

will blink twice, indicating that 2-way communication is enabled.

button (inside the

(press/hold/

, both garage door operation indicators will flash rap-

button after programming has been

6-4. Other interior features

button to operate a garage

within the first 10

button, after the

Troubleshooting