Toyota Tacoma 2018 Owner's Manual page 546

546
7-3. Do-it-yourself maintenance
Headlight high beam
■
1
Unplug the connector while
pressing the lock release.
2
Turn the bulb base counter-
clockwise.
3
Set the new light bulb.
Align the 3 tabs on the light bulb
with the mounting and insert.
Turn it clockwise to set.
4
Install the connector.
After installing the connector,
shake the bulb base gently to
check that it is not loose, turn
the headlight high beams on
once and visually confirm that
no light is leaking through the
mounting.