Toyota Tacoma 2018 Owner's Manual page 272

272
4-5. Using the driving support systems
Adjusting the set speed
To change the set speed, operate the lever until the desired set speed
is obtained.
1
Increases the speed
2
Decreases the speed
Fine adjustment:
move the lever in the desired direc-
tion.
Large adjustment: Hold the lever in
the desired direction.
The set speed will be increased or decreased as follows:
Fine adjustment: By approximately 1 mph (1.6 km/h)
*
2
(0.6 mph)
Large adjustment: The set speed can be increased or decreased continu-
ally until the lever is released.
*
1
: When the meter setting is "MPH"
*
2
: When the meter setting is "km/h"
Canceling and resuming the constant speed control
1
Pulling the lever toward you
cancels the constant speed
control.
The speed setting is also canceled
when the brakes are applied.
2
Pushing the lever up resumes
the constant speed control.
Resuming is available when the
vehicle speed is more than approx-
imately 25 mph (40 km/h).
Momentarily
each time the lever is operated.
*
1
or 1 km/h