Replacing The System Board; Procedure - Dell XPS 15 Service Manual

2 in 1

Hide thumbs Also See for XPS 15:

Table of Contents

WARNING:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your

your

computer. For more safety best practices, see the Regulatory Compliance home page at

regulatory_compliance.

NOTE:

Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program

after you replace the system board.

NOTE:

Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You must

make the appropriate changes again after you replace the system board.

Topics:

•

•

Post-requisites

•

Entering the Service Tag in the BIOS setup program

Procedure

Using the alignment posts, place the system board on the palm-rest and keyboard assembly and align the screw holes on the system

board with the screw holes on the palm-rest assembly.

Replace the 2 screws (M2x3) that secure the system board to the palm-rest and keyboard assembly.

Align the screw holes on the type-C USB bracket with the screw holes on the system board and replace the three screws (M2x4) that

secure the type-C USB bracket to system board.

Replacing the system board

computer. After working inside your computer, follow the instructions in

After working inside

www.dell.com/

Replacing the system board

Table of Contents