Motorola MTM800 Feature User Manual page 83

Enhanced tetra mobile terminal
Hide thumbs Also See for MTM800:
Table of Contents

Advertisement

Available languages

Available languages

Count of the efforts and duration that your radio waits for the
reply of the alarm are set by the Service Provider. This can be
only interuppted when the user exits the Silent Emergency
mode.
• ambience listening terminates.
Silent Emergency Mode interactions
User presses the Emergency button while in Silent Emergency
• radio sends silent emergency alarm.
• radio provides no audible/visible indication.
In Silent Emergency Mode when the battery is removed the
radio will turn on again in the normal mode.
Silent Emergency and TMO/DMO Mode
As the Silent Emergency is only available in TMO, radio will
change the mode from DMO to TMO. When the user is in a
private or group call, Silent Emergency waits until any of the
calls is ended to change the mode and enter the Silent
Emergency Mode.
If the Silent Emergency mode enters after the call the only
change on the display is the Private/Group notice which
disappears.
Power off in Silent Emergency mode
If user initiates the power off while in Silent Emergency mode
the radio goes to pseudo power off state. In this state audio
and visible indications are turned off but the radio is still on in
the Silent Emergency mode as before.
If the radio exits the Silent Emergency mode after powering off
in it, the radio shuts down without any indication.
Power on in pseudo power off
User presses the Emergencey button, the radio indicates
power on but it is still in Silent Emergency mode.
75

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents