Motorola MTM800 Feature User Manual page 80

You can also participate in an Emergency Group Call
(initiated by others) in Emergency Mode or in a standard
Group Call.
Hot Microphone Feature in TMO
If the Hot Microphone feature was programmed into your
MTM800 Enhanced by your Service Provider, you can make
an Emergency Group Call without the need to press and hold
the PTT.
The following will happen upon entering Emergency Mode:
1. The MTM800 Enhanced will automatically send an
Emergency Alarm to the dispatcher (if configured by your
Service Provider).
2. A Talk permit tone will be heard.
3. The following typical display will
appear: The microphone will stay open
for a time period determined and
programmed by your Service Provider.
After the Hot Microphone time period
expires, or if you press PTT during the
Hot Microphone period, or if you press End soft key: the
Emgcy Mic Ended message will be displayed.The talk
session ends. To resume, press the Emergency button again.
If talk permit is granted to another
member of the group, an "Emergency
call received" tone will be heard. If
configured by your Service Provider, your
MTM800 Enhanced will automatically
attempt to get talk permit again and the
Wait For Mic message will be displayed.
During this pending time the MTM800 Enhanced microphone is
not active until the Emgcy Mic On message is displayed again.
Hot Microphone feature is available in DMO and TMO modes.
72
End
Hot Mic On
Folder 1
TalkGroup 1
Optns
End
Emgcy In Use
ID:David
Wait For Mic
Optns