Making A Dmo Group Call (Ms To Ms) - Motorola MTM800 Feature User Manual

Specific
gateway with the specified gateway address for that
talkgroup.
Upon selecting "Specific", you will see one of the following
displays:
• The selected gateway address (e.g.:
1022), pre-programmed by your
Service Provider or previously
entered by yourself via the keypad.
Press Edit and then Ok to use the
current address, or press Edit and
enter a new address via the keypad, and press Ok. The
Gateway and Repeater icons will flash upon selecting
the gateway.
• "None", indicating that no gateway was selected for that
talkgroup. Enter an address via the keypad, and press
Ok. The Gateway and Repeater icons will flash upon
selecting the gateway.
When the MTM800 Enhanced detects
the appropriate gateway and/or the
repeater, the Gateway and/or Repeater
icons will turn solid, respectively.

Making a DMO Group Call (MS to MS)

1. Enter Direct Mode by pressing Optns
and selecting Direct Mode.
2. Make sure that you have selected the
required group. Press and hold the PTT
button.
3. Wait for the talk permit tone and then
speak into the microphone. Release the PTT button to
listen.
50
the MTM800 Enhanced will use only the
—
GW options:
Back
Selected Gateway
1022
Select
Contcs
DMO Folder 1
Police
Hello
Optns
Contcs
DMO Folder 1
Police
Hello
Optns