2. Time only - The MTM800 Enhanced displays time only.
Format Date sub-menu is disabled.
3. Date Only - The MTM800 Enhanced displays date only.
Format Time sub-menu is disabled.
4. Off - The MTM800 Enhanced does not display time nor
date. Format menu is disabled.
Scroll to the desired setting and press Select
exit.
Setting Time Format
To change displayed time format between 24-hour scale and
12-hour scale:
1. From the main menu, select Setup > Time & Date
> Format > Format Time.
2. Scroll through the settings.
3. Choose required setting, and press Select. Press Back to
exit.
Setting Date Format
To change displayed date format between DD/MM/YY, MM/
DD/YY and DD-MON-YY:
1. From the main menu, select Setup > Time & Date
> Format > Format Date.
2. Scroll through the settings.
3. Choose required setting, and press Select. Press Back to
exit.
Time and date are synchronized by the infrastructure. When not
within the infrastructure signal range you can set the values
manually.
Setting Time
To set time:
1. From the main menu, select Setup > Time & Date > Set
> Set Time.
120
Press Back to
.