Revision History - Omron SYSMAC C200H-AD003 Operation Manual

A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code
1 August 1997
2 June 1998
3 May 1999
4 June 2003

Revision History

Cat. No. W325-E1-04
Date
Original production
Pages xii to xiv: Precautionary information changed.
Pages 10, 67: "Approximately" added to the conversion time of 0.3 ms in note
4.
Page 20: CPU Unit model numbers corrected.
Pages 27, 54, 92: I/O table information added to the Caution.
Page 38: "Approximately" added to the conversion time of 0.3 ms in note 3.
Page 67: Conversion time addition corrected from "0.9 ms" to "0.3 ms."
Page 105: Error code F0 added to the table.
Pages 116, 117: Sample Program 5: Scaling rewritten and added to.
Pages xii to xiv: Precautionary information changed.
Pages 15, 73: "Line Breakage while Using Voltage Input" section added.
Pages 27, 30, 31, 54, 58, 60, 92, 94, 96, 97, 100, 103: Offset adjustment and
gain adjustment information added to the Caution.
Page 41: "Analog Input Unit" corrected to "Analog Output Unit" in the first sen-
tence of 3-2-2 Unit Number Switch.
Page 47: Left column of the IR allocation table corrected.
Page 89: Loop 1 and 2 bit settings for Specifying I/O Relationships corrected.
Pages 113, 116, 117, 120: Minor corrections to the sample program informa-
tion.
Page 127: Loop 1 and 2 bit settings for Use Designation corrected.
Page xii: Safety precautions added.
Page xiii: "Power Supply Units" added in one place.
Page 4: Information on mounting limitations added.
Page 38: Note added after table.
Page 66: Two lines added to table.
Page 67: Note added after table.
Revision code
Revised content
133