Errors Detected By Analog I/O Unit; Errors Detected By Cpu Unit - Omron SYSMAC C200H-AD003 Operation Manual

Error Processing

4-9-3 Errors Detected by CPU Unit

Special I/O Unit Error Flag
Bit Error
25415
I/O UNIT OVER
SPECIAL I/O UNIT
ERROR
Special I/O Unit Error Flags
106
When the CPU Unit detects an error at a Special I/O Unit, it outputs to the CPU
Unit's SR and AR areas as shown below.
Contents
The same unit number
has been set for more
than one Special I/O Unit.
Error occurred in I/O
refresh between Special
I/O Unit and CPU Unit.
Bits
C200HX/HG/HE
28200
28201
28202
28203
28204
28205
28206
28207
28208
28209
28210 (See note.)
28211 (See note.)
28212 (See note.)
28213 (See note.)
28214 (See note.)
28215 (See note.)
Note SR bits 28210 to 28215 cannot be used with C200HE and C200HX/HG-
CPU3j-E/4j-E PCs.
CPU Unit status
CPU Unit operation is
stopped.
Operation is stopped only
for faulty Unit.
C200H/HS
AR 0000 Unit #0 Error Flag
AR 0001 Unit #1 Error Flag
AR 0002 Unit #2 Error Flag
AR 0003 Unit #3 Error Flag
AR 0004 Unit #4 Error Flag
AR 0005 Unit #5 Error Flag
AR 0006 Unit #6 Error Flag
AR 0007 Unit #7 Error Flag
AR 0008 Unit #8 Error Flag
AR 0009 Unit #9 Error Flag
--- Unit #A Error Flag
--- Unit #B Error Flag
--- Unit #C Error Flag
--- Unit #D Error Flag
--- Unit #E Error Flag
--- Unit #F Error Flag
Section 4-9
LED indicators
RUN: Not lit
ERROR: Not lit
RUN: Not lit
ERROR: Not lit
Functions
Turns ON for any unit y
number when I/O b h I/O
UNIT OVER or UNIT OVER or
SPECIAL I/O UNIT SPECIAL I/O UNIT
ERROR occurs.