Line Mode; Auto Talk - Panasonic KX-TG5240M Operating Instructions Manual

Line Mode

Handset
The line mode is preset to "B" and generally should not be adjusted. If a Panasonic
customer call center representative or service person recommends changing the
line mode, change it to "A".
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Scroll to "Set tel line" by pressing [d] or
[B], then press the soft key (
4
Scroll to "Set line mode" by pressing [d]
or [B], then press the soft key (
5
Select "A" or "B" by pressing [d] or [B].
6
Press the soft key (

Auto Talk

Handset
The Auto Talk feature allows you to answer a call by lifting the handset off the base
unit or the charger (for accessory handset users, p. 3) without pressing [C] or [s].
To use this feature, turn the feature ON. The factory preset is OFF.
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Scroll to "Auto talk" by pressing [d] or
[B], then press the soft key (
4
Select "On" or "Off" by pressing [d] or [B].
5
Press the soft key (
• In order to view Caller ID information after you lift the handset to answer a call,
leave the Auto Talk feature OFF.
For assistance, please call: 1-800-211-PANA(7262)
Programmable Settings
SELECT
).
SELECT
).
SELECT
), then press [OFF].
SAVE
SELECT
).
SELECT
), then press [OFF].
SAVE
Initial setting
).
Set tel line
Set line mode
Set line mode
:B
Initial setting
).
Auto talk
Auto talk
:Off
19