If The Following Appear On Your Display - Panasonic KX-TG5240M Operating Instructions Manual

If the Following Appear on Your Display...

If the unit detects a problem, one of the following messages will be displayed on the
handset. Error beeps or a busy tone will sound.
Display message
Recharge battery
Charge for 6 HRS
No link to base.
Move closer to
base and try
again.
Please lift up
and try again.
Busy
Invalid
Error!!
Phone book full
For assistance, please call: 1-800-211-PANA(7262)
Cause & Remedy
• The battery needs to be charged. Recharge the
battery (p. 13).
• The battery has been discharged. The handset will
not work. Fully charge the battery (p. 13).
• The handset has lost communication with the base
unit. Walk closer to the base unit, and try again.
• Confirm the base unit's AC adaptor is plugged in.
• Raise the base unit antennas.
• The handset's registration may have been canceled.
Re-register the handset (p. 82).
• A handset button was pressed while the handset was
on the base unit or the charger (for accessory
handset users, p. 3). Lift the handset and press the
button again.
• The called unit is in use.
• Privacy mode is on for the call you tried to join
(p. 55).
• The handset you tried to send phone book items to is
in use.
• The handset you are calling is too far from the base
unit.
• The called handset has not been registered to the
base unit.
• You selected your own extension number.
• When you tried to register or deregister the handset,
the handset and base unit could not link for some
reason, such as interference from electrical
appliances. Move the handset and base unit away
from any electrical appliances and try again.
• If more than one handset is in use, you may not be
able to register/deregister. Try again later.
• Another handset tried to send phone book items to
you but copying stopped (p. 44, 45).
• When you tried to store an item in the phone book,
the phone book memory was full. Press[OFF] to exit
programming mode. To erase other items from the
phone book, see page 43.
83