Selecting The Line Mode - Panasonic KX-TC1733CB Operating Instructions Manual

Selecting the Line Mode

If the line is connected to a low voltage system such as a PBX, set to "B".
Your phone comes from the factory set to "A".
Make sure the unit is in the standby mode.
(REDIAL/PAUSE/FUNCTION)
1 Press
(›) (‹)
2 Press or repeatedly until the arrow
points to "Program".
EDIT (fl)
3
Press .
(›) (‹)
4 Press or repeatedly until the arrow
points to "Set line mode".
EDIT (fl)
5 Press .
(›) (‹)
6 Press or to select "B" or "A".
EDIT (fl)
7 Press (Save key).
≥A beep sounds.
≥To return to the standby mode, press (OFF).
≥You can exit the programming mode any time by pressing (OFF).
.
Program
1Save directory
Ringer volume
Ringer volume
1Program
Save directory
TAD program
1LCD contrast
Chnge language
Set flash time
1Set line mode
Set dial mode
Line mode
4 3
Line mode
:A
1=Save
:B
17