Selecting The Line Mode - Panasonic KX-TG2583S Operating Instructions Manual

Settings
Selecting the Line Mode
If the line is connected to a low voltage system such as a PBX, set to "B".
Otherwise the Call Waiting Caller ID Feature may not be used (p. 54).
Your phone comes from the factory set to "A".
Use the handset near the base .unit.
Make sure the unit is in the standby mode initially.
1
2
3
Press LFUNCTION/EXIT/CHJ.
Press [_[] or [][] repeatedly until the arrow
points to
"Program".
Press FWD/EDIT [_] (Yes key).
bSave directory 1
• Ringer volume
TA ):Yes
YA)Pr°gram _:Yes
)Save DIRECT#
Set _ash time
YA _=Yes
_Set line mode
Set dial. mode
YA _=Yes
[ Line mode ]:A
TA _:Save
I Line mode
:B]
TA _:SaveJ
Line mode :BI
4
5
Press [_] or [_] repeatedly until the arrow
points to "Set line mode".
Press FWD/EDIT [][]
(Yes
key).
6
7
Press [_ or [_ to select "B" or "A".
Press FWD/EDIT [_ (Save key).
• A beep sounds.
,,To return to the standby mode, press
[FUNCTION/EXlT/CH J.
• You can exit the programming mode any time by pressing [FUNCTION/EXIT/CH].
,,If the handset has lost communication with the base unit, 3 beeps sound and "_qo
link to base. Place on cradle and t_y again." is displayed.
]4