Panasonic KX-TG5240M Operating Instructions Manual page 54

Room Monitor
To monitor with
The destination unit must not be in use and the destination handset must be
off the base unit.
1
Press [HOLD/INTERCOM], then press the soft key (
2
To call the base unit, press [0].
To call another handset, press its extension
number ([1] to [4]).
• To monitor from the speaker, press [s]. You can
place the handset on the charger but you cannot
place it on the base unit and continue monitoring.
Placing the handset on the base unit will
disconnect room monitoring. To switch back to
the receiver, press [C].
3
To end monitoring, press [OFF].
• The monitored user can stop being monitored by:
— on the handset, press [OFF] or place the handset on the base unit.
— on the base unit, press [LOCATOR/INTERCOM/TRANSFER] or
[SP-PHONE].
• "Room monitor" is also displayed on the monitored handset.
• While the base unit is monitoring or being monitored, the LOCATOR/INTERCOM/
TRANSFER indicator flashes and the SP-PHONE indicator lights.
To monitor with
The destination handset must not be in use and off the base unit.
1
Press [LOCATOR/INTERCOM/TRANSFER], then press [MUTE].
2
To call the handset, press its extension number ([1] to [4]).
3
To end monitoring, press [LOCATOR/INTERCOM/TRANSFER] or
[SP-PHONE].
54
Handset
Base Unit
).
MONITOR
Press extension#
to room monitor
1-4=Handset
0=Base
Room monitor
00-00-05
D01