Maintenance And Cleaning - Parkside PHPA 3.6 A1 Instructions Manual

Gluing:
♦ Pull the trigger
in accordance with your requirements.
♦ Apply the glue in spots. For flexible materials, such as textiles,
apply the glue in zigzag lines.
♦ Press the two workpieces to be bonded together immediately
after applying the glue and hold for about 30 seconds. The
glued bond is ready after about 5 minutes.
♦ During pauses in work, place the cordless hot glue gun onto the
charging cradle
♦ Remove any glue residue after it has cooled down with a sharp
knife. Bonded joints can be released by heating.

Maintenance and cleaning

The cordless hot glue gun is maintenance free.
WARNING! Always remove the mains adapter
the power socket before cleaning the appliance. Keep the
appliance clean and dry at all times.
■ The appliance must always be kept clean, dry and free from oil
or grease.
■ Never permit fluids to penetrate inside the appliance.
■ Use a soft cloth to clean the appliance housing. Never use ben-
zine, solvents or cleansers which can damage plastic.
PHPA 3.6 A1
to regulate the flow of glue
.
from
GB │ IE │
11 ■