Battery Level Display; Preparing The Surfaces To Be Glued - Parkside PHPA 3.6 A1 Instructions Manual

Battery level display

The battery level display
ed LEDs.
Green LED:
The battery is fully charged.
Red LED:
The battery is flat. Recharge it.

Preparing the surfaces to be glued

■ Do not use flammable solvents to clean the surfaces to be glued.
■ The ambient temperature and the materials to be bonded may
not be colder than 5°C and not warmer than 50°C.
■ The area to be glued must be clean, dry and free of grease.
♦ Smooth surfaces should be roughened before gluing.
♦ Quick-cooling materials such as steel should be warmed a little
to facilitate adhesion.
PHPA 3.6 A1
indicates the charge level using 2 colour-
GB │ IE │
9 ■