Replacing The License Plate Light Bulb; Troubleshooting - Yamaha X MAX CZD300-A Owner's Manual

Periodic maintenance and adjustment
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the bolts and plate,
and then remove the license plate
light bulb socket (together with the
bulb) by pulling it out.
4
8
1. License plate light unit
2. Bolt
3. License plate light bulb socket
4. Plate
2. Remove the burnt-out bulb by
pulling it out.
EAU78560
1. License plate light bulb
3
3. Insert a new bulb into the socket.
1
4. Install the socket (together with
the bulb) by pushing it in, and then
install the license plate light unit by
installing the plate and bolts.
2

Troubleshooting

Although Yamaha vehicles receive a
thorough inspection before shipment
1
from the factory, trouble may occur
during operation. Any problem in the
fuel, compression, or ignition systems,
for example, can cause poor starting
and loss of power.
The following troubleshooting charts
represent quick and easy procedures
for checking these vital systems your-
self. However, should your vehicle re-
quire any repair, take it to a Yamaha
dealer, whose skilled technicians have
the necessary tools, experience, and
know-how to service the vehicle prop-
erly.
Use only genuine Yamaha replace-
ment parts. Imitation parts may look
like Yamaha parts, but they are often
inferior, have a shorter service life and
can lead to expensive repair bills.
When checking the fuel system, do
not smoke, and make sure there are
no open flames or sparks in the ar-
ea, including pilot lights from water
8-32
WARNING
EAU60701
EWA15142