Yamaha X MAX CZD300-A Owner's Manual page 35

NOTICE
Do not continue to operate the en-
gine if it is overheating.
TIP
 If a problem is detected in the
coolant temperature meter, all
segments will flash repeatedly. If
this occurs, have a Yamaha dealer
check the vehicle as soon as pos-
sible.
 The coolant temperature varies
with changes in the weather and
engine load.
Tripmeter display
1. Tripmeter display
ECA10022 The tripmeter display is equipped with
the following:
 odometer
 tripmeter
 time tripmeter
 fuel reserve tripmeter
 oil change tripmeter
 V-belt replacement tripmeter
Push the "TRIP" switch to change the
display between the odometer "Odo",
tripmeter "Trip", time tripmeter "Trip
Time", oil change tripmeter "Oil Trip",
and V-belt replacement tripmeter "V-
Belt Trip" in the following order:
Odo → Trip → Trip Time → Oil Trip →
V-Belt Trip → Odo
TIP
When approximately 2.4 L (0.63 US
gal, 0.53 Imp.gal) of fuel remains in the
fuel tank, the last segment of the fuel
meter will start flashing. The display
will automatically change to the fuel re-
serve tripmeter "F Trip" and start
1
counting the distance traveled from
that point.
Instrument and control functions
Odometer
"Trip"
The odometer shows the total distance
traveled by the vehicle.
The tripmeter shows the distance trav-
eled since it was last reset.
To reset the tripmeter, select it by
pushing the "TRIP" switch, and then
push the "TRIP" switch for three sec-
onds.
TIP
 The odometer will lock at 999999.
 The tripmeter will reset and conti-
Time tripmeter "Time"
1. Time tripmeter
5-5
"Odo" and tripmeter
nue counting after 9999.9 is
reached.
5
1