Handlebar Position; Adjusting The Shock Absorber Assemblies - Yamaha X MAX CZD300-A Owner's Manual

dent. Be sure to tighten the
screws to the specified torque.
[EWA15511]
1
1. Bolt
Tightening torque:
Windshield bolt:
8 N·m (0.8 kgf·m, 5.9 lb·ft)
5. Place the bolt access covers, and
then install the quick fasteners.

Handlebar position

The handlebar can be adjusted to one
of two positions to suit the rider's pref-
erence. Have a Yamaha dealer adjust
the position of the handlebar.
1
1
1. Handlebar
5-23
Instrument and control functions
EAU46833
Adjusting the shock absorber
assemblies
WARNING
Always adjust both shock absorber
assemblies equally, otherwise poor
handling and loss of stability may re-
sult.
Each shock absorber assembly is
equipped with a spring preload adjust-
ing ring.
NOTICE
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Adjust the spring preload as follows.
To increase the spring preload and
thereby harden the suspension, turn
the adjusting ring on each shock ab-
sorber assembly in direction (a). To de-
crease the spring preload and thereby
soften the suspension, turn the adjust-
ing ring on each shock absorber as-
sembly in direction (b).
EAU14894
EWA10211
5
ECA10102