Yamaha X MAX CZD300-A Owner's Manual page 77

1
1. Coolant level check window
2. Maximum level mark
3. Minimum level mark
3. If the coolant is at or below the mi-
nimum level mark, remove the left
floorboard mat by pulling it up.
1. Floorboard mat
4. Remove the coolant reservoir cov-
er.
Periodic maintenance and adjustment
2
3
1
1. Coolant reservoir cover
5. Remove the coolant reservoir cap,
add coolant to the maximum level
mark, and then install the reservoir
cap. WARNING! Remove only
the coolant reservoir cap. Never
attempt to remove the radiator
cap when the engine is hot.
1
NOTICE: If coolant is not
[EWA15162]
available, use distilled water or
soft tap water instead. Do not
use hard water or salt water
since it is harmful to the engine.
If water has been used instead
of coolant, replace it with cool-
ant as soon as possible, other-
wise the cooling system will not
be protected against frost and
corrosion. If water has been
1. Coolant reservoir cap
6. Install the coolant reservoir cover.
7. Place the left floorboard mat in the
8-13
added to the coolant, have a
Yamaha dealer check the anti-
freeze content of the coolant as
soon as possible, otherwise the
effectiveness of the coolant will
be reduced.
[ECA10473]
1
Coolant reservoir capacity (up to
the maximum level mark):
0.18 L (0.19 US qt, 0.16 Imp.qt)
original position and push it down-
ward to secure it.
8