Yamaha X MAX CZD300-A Owner's Manual page 80

Periodic maintenance and adjustment
8. Check the pre air filter element for
damage, and replace it if neces-
sary.
9. Insert the pre air filter element into
the air filter case cover.
10. Install the air filter case cover by
installing the screws.
8
TIP
The long screw should be installed as
shown.
1
1. Long screw
11. Install the rubber plugs.
Cleaning the V-belt case air filter el-
ement
1. Place the vehicle on the center-
stand.
2. Remove the air filter case cover.
(See the previous section.)
3. Remove the V-belt case cover
screws.
8-16
1
1
1. Screw
4. Remove the air filter case bolts.
1
1. Bolt
5. Lift up the air filter case slightly, re-
move the rear wheel sensor lead
from the holder, and then remove
the V-belt case cover.