Clearing The Pair Settings - Sennheiser PXC550 Instructions Manual

Troubleshooting
48 | PXC 550
Leaving t he Bluet oot h t ransmission range
Wireless calling and streaming are only possible in the
range of your smartphone. The transmission range largely depends on environ-
mental conditions such as wall thickness, wall composition etc. With a free line
of sight, the transmission range of most smartphones and
up to 10 meters.
If the headphones leave the
the sound quality deteriorates until you repeatedly hear the voice prompt
co nne ctio n... pho ne disco nne cte d o r do ngle disco nne cte d" ( re vie w)
point, the connection breaks down completely, and a LED flashes red 3 times.
The connection will be re-established automatically if you re-enter the
transmission range. You hear the voice prompt
t oot h
back within the
Bluet oot h
Rest art ing or reset t ing t he PXC 550 headphones
If something isn't working right, try restarting or resetting your headphones.
1. Switch the headphones off. See page 24.
2. Press the sound button for at least 4 seconds.
Clearing t he pair set t ings
1. Switch the headphones on or unfold the headphones in a ready to wear po-
sition (see page 23). Press the
hear the voice prompt
" pairing"
display.
The headphones are in pairing mode.
2. Press the sound button again twice.
You hear the voice prompt
times. The pairing settings are cleared from the headphones.
› power on ‹
› pairing ‹
20 cm
transmission range of the smartphone,
Bluet oot h
transmission range and a LED flashes white 3 times.
Sound button and keep it pressed until you
and the 5-LED array flash white in a running
" pairing list cle are d"
Sound button
transmission
Bluet oot h
devices is
Bluet oot h
" lo st
. At this
Blue-
if you are
" co nne cte d"
and an LED flashes red 3