Table of Contents
Advertisement
43-1123.fm Page 19 Tuesday, September 5, 2000 11:13 AM
Menu Options:
•
Edit Memory nn
record as described in Steps 5
through 8 of "Storing a Name and
Number in Memory" on Page 17.
•
Delete Memory nn
prompts you to confirm the deletion.
Move the cursor to
or
SELECT
DEL/CH
beeps, and
Memory nn Deleted
appears.
•
— returns you to the list of
Go Back
memory numbers.
Entering a Pause
In some telephone systems, you must
dial an access code (
9
wait for a second dial tone before you
can dial an outside number. You can
store the access code with the phone
number. However, you should also store
a pause after the access code to allow
the outside line time to connect.
To enter a 2-second pause, press
(
on the base).
AL/PAUSE
REDIAL
pears on the display when you enter a
pause in the memory. You can add
more pause entries for a longer pause.
Reviewing Memory Numbers
(Handset Only)
To review your memory numbers, press
. The list of memory location num-
MEM
bers (
-
) and the name stored with
01
20
each number (or
<Memory nn>
did not store a name) appears. To view
several a memory location, press its
— edit the
— the display
Yes
, then press
. The phone
, for example) and
REDI-
P
ap-
if you
number (
-
) or repeatedly press
01
20
9 9 9 9
or
.
To see the stored phone numbers, press
7 7 7 7
. An arrow to the right of the number
means it is longer than 14 digits. Press
7 7 7 7
again to see the rest of the number.
6 6 6 6
Repeatedly press
name display.
To exit the memory number list, press
.
MEM
To see a stored name and phone num-
ber at the same time, press
when the cursor is by a memory location
number. To exit this display, hold down
until the display clears.
DEL/CH
Dialing a Memory Number
To dial a number stored in handset's
memory, lift the handset and press
The list of memory location numbers ap-
pears. Choose a memory location (
) by pressing a number or by repeat-
20
8 8 8 8
edly pressing
or
.
TALK
You can also dial a memory number af-
ter pressing
. Press
TALK
play does not change but the phone is in
memory recall mode) then enter a mem-
ory location number.
To dial a number stored in the base's
memory, press
MEMORY
No.
appears. Press a number key (
the display shows the number contained
in the selected memory location. Press
to dial the number on the dis-
SPEAKER
play.
8 8 8 8
to return to the
SELECT
.
MEM
-
01
9 9 9 9
, then press
(the dis-
MEM
.
Location
-
);
0
9
19
Advertisement
Table of Contents
