Using Redial; Using Flash; Using Tone Services On A Pulse Line - Radio Shack ET-1109 Owner's Manual

43-1109.fm Page 14 Friday, June 18, 1999 10:26 AM

USING REDIAL

You can quickly dial any of the last three
numbers you dialed recently. Lift the
handset and repeatedly press
until the number you wish to dial
PAUSE
displays. Then press
phone dials the number.
Notes:
• You can also press
after pressing
TALK
number dialed.
• The redial memory holds up to 32
digits, so you can redial long-
distance as well as local numbers.
• The redial memory also holds pause
entries. See "Entering a Pause" on
Page 17.

USING FLASH

performs the electronic equiva-
FLASH
lent of a switchhook operation for spe-
cial services, such as Call Waiting.
14
For example, if you have Call Waiting,
press
without disconnecting the current call.
Press
call.
REDIAL/
Note: If you do not have any special
and the
TALK
phone services, pressing
disconnect the current call.
USING TONE SERVICES
ON A PULSE LINE
Some special services require tone sig-
nals (such as bank-by-phone). If you
have pulse dialing, you can still use
these special tone services by following
these steps.
1. Be sure
REDIAL/PAUSE
2. Dial the service's main number.
to dial the last
3. When the service answers, press
4. The ET-1109's dial mode resets to
to answer an incoming call
FLASH
again to return to the first
FLASH
DIAL MODE
(pulse).
( ). Any additional numbers
TONE
you dial are sent as tone signals.
pulse when you make or receive a
call.
might
FLASH
is set to
P