Table of Contents
Advertisement
43-1109.fm Page 6 Friday, June 18, 1999 10:26 AM
INSTALLATION
MOUNTING THE PHONE
You can place the phone on a desk or
table, mount it on a standard wall plate,
or mount it directly on a wall.
Select a location that is:
• near an AC outlet
• near a telephone line jack
• out of the way of normal activities
• away from electrical machinery,
electrical appliances, metal walls or
filing cabinets, wireless intercoms,
alarms, and room monitors
• away from other cordless phones
The base's location affects the hand-
set's range. If you have a choice of sev-
eral locations, try each to see which
provides the best performance.
Caution: You must use a Class
!
2 power source that supplies 9
volts DC and delivers at least
210 mA. Its center tip must be set to
positive and its plug must fit the ET-
1109's
jack. The supplied
DC IN 9V
adapter meets these specifications. Us-
ing an adapter that does not meet these
specifications could damage the ET-
1109 or the adapter.
Notes:
• Your telephone connects directly to
a modular phone line jack. If your
phone line jack is not a modular
jack, you can update the wiring
yourself, using jacks and adapters
available
from
6
On a Desk
Follow these steps when you place the
base on a desk, shelf or table.
your
local
Ra-
dioShack store. Or, you can let the
telephone company update the wir-
ing for you.
• The USOC number of the jack to be
installed is RJ11C, or RJ11W for a
wall plate jack.
1. Plug one end of the supplied long
modular cord into the
on the back of the base.
2. Insert the supplied AC adapter's
barrel plug into the
the back of the base.
jack
TEL LINE
jack on
DC IN 9V
Advertisement
Table of Contents
