Testing Stored Emergency Numbers; Deleting Information In A Single Memory Location; Deleting Information In All Memory Locations - Radio Shack ET-1105 Owner's Manual

Testing Stored Emergency
Numbers
If you store an emergency service's
number (police department, fire depart-
ment, ambulance) and you choose to
test the stored number, make the test
call during the late evening or early
morning hours to avoid peak demand pe-
riods. Remain on the line to explain the
reason for your call.
Deleting Information in a Single
Memory Location
1. Recall the memory location contain-
ing the information you want to
delete.
2. Press
DELETE
DELETE
3. Press
DELETE
letion. The previous memory loca-
tion number and the number stored
there appear.
To exit without deleting the informa-
tion, wait 10 seconds without press-
ing any button.
18
. DELETE ? appears.
again to confirm de-
Deleting Information in All
Memory Locations
1. Press
CALL ID
TOTAL MEM=xx
2. Press
DELETE
pears.
3. Press
DELETE
letion. DELETE OK
To exit without deleting all of the
memory location information, wait
10 seconds without pressing any
button.
, then press #/ .
displays.
. DELETE ALL ?
again to confirm de-
appears.
ap-