Caller Id Operation - Radio Shack ET-1105 Owner's Manual

CALLER ID OPERATION

If you subscribe to Caller ID service from
your phone company, the ET-1105 auto-
matically displays the information the
phone company sends, along with the
date and time the call was received, be-
tween the first and second rings of every
call you receive. It stores up to 45 num-
ber only or name and number call
records in its Caller ID memory.
The display also shows if caller informa-
tion is not available or if the number is
blocked by the sender (see "Caller ID
Displays" on Page 20).
The IN USE indicator flashes on the
base during an incoming call,
pears briefly, the call record and
pear for 10 seconds, then the display
blanks out.
If you subscribe to your phone compa-
ny's message waiting service, your sys-
tem informs you when you have a
message waiting. If the IN USE and
MESSAGE indicators on the base flash
(or
CALL ID
voice message in your mailbox. The IN
USE and MESSAGE indicators flash (or
CALL ID
trieve the message.
RING ap-
ap-
NEW
If you subscribe to Call Waiting, the
MESSAGE indicator lights on the base
during a call. The Caller ID record ap-
pears. If you want to answer the incom-
ing call, press
previous phone conversation, press
FLASH
appears after you press
on the handset), you have a
appears after you press
on the handset) until you re-
FLASH
again.
REDIAL
or
TALK
or
TALK
. To resume the
19