Message Window Displays
n
Note: When the memory is full, the answering system answers
incoming calls after 10 rings and announces, "Memory is full. Enter the
remote access code."
Remote Access
A two-digit security code is required to access the answering system
remotely from any touch tone telephone. The preset code is 19; see "Remote
Code" on page 15 to change it.
Dial your telephone number from any touch tone telephone.
1.
2.
When the system plays your announcement, enter the two-digit
security code.
3.
You can also enter one of the following remote commands.
Hang up or press 8 to end the call.
4.
n
Notes:
•
If you do not press any keys after you enter the remote access code,
all new messages play. If there are no new messages, all old messages
play.
•
Once the new messages ha�e played, the telephone announces the
help menu options. If you do not press any key within 20 seconds, the
remote access call automatically disconnects.
•
When the answering system is turned off, the telephone answers after
10 rings, and announces, "Please enter your remote access code."
3