Mute; Ringer Mute; Call Waiting; Find Handset - Radio Shack 43-329 User Manual

Mute

The mute function allows you to hear the other party
but the other party cannot hear you.
During a call, press MUTE/REMOVE on the handset.
1.
The handset screen shows MUTED for a few seconds
and MUTE appears until the mute function is
turned off.
Press MUTE/REMOVE again to resume the
2.
conversation. The handset screen temporarily shows
MICROPHONE ON.

Ringer Mute

When the telephone is ringing, press OFF/CLEAR or
MUTE/REMOVE to temporarily silence the ringer without
disconnecting the call. The next call rings normally.

Call Waiting

When you subscribe to call waiting service from your telephone company,
you hear an alert tone if there is an incoming call while you are on another
call.
Press /FLASH to put your current call on hold and take the new call.
Press /FLASH at any time to switch back and forth between calls.

Find Handset

Use this feature to page all system handsets.
Press FIND HANDSET on the telephone base. All
1.
idle handsets ring and the screens show
** PAGING **.
2. To end paging, press
keys (0-9, #, *), or press FIND HANDSET on the
telephone base.
/FLASH,
, any dialing
19
PHONE PHONE 0:00:00 0:00:00
MUTED MUTED
MUTE MUTE
RINGER MUTE RINGER MUTE