Expand Your Telephone System; Add And Register A Handset (Optional) - Radio Shack 43-329 User Manual

Answering system caller id cordless phone
Table of Contents

Advertisement

Recycle Rechargeable Batteries
Placing rechargeable batteries in the trash can be harmful to the
environment. Instead, recycle old rechargeable batteries at your
local RadioShack store free of charge. RadioShack participates in
the RBRC© battery recycling program, and is committed to
preserving the environment and conserving natural resources.
Call 1-800-THE-SHACK (1-800-843-7422) for more information.

Expand Your Telephone System

The handsets provided with your telephone system are pre-registered. Each
handset is assigned a number that shows on the handset display. Additional
handsets registered to the telephone system are assigned in sequential
order. For instance, if the telephone system already has HANDSET 1 and
HANDSET 2, the new registered handset is assigned HANDSET 3. This
telephone system accommodates up to 12 handsets.

Add and Register a Handset (Optional)

You can add new handsets to your telephone system, but each handset
must be registered with the telephone base before use. When first
purchased, each expansion handset shows NOT REGISTERED. You may need
to charge the handset before registering to the telephone base. For more
details on battery charging, see the table on page 6.
To register a handset:
1.
Place the unregistered handset in the telephone base or charger. If
PRESS FIND HS 4 SEC ON BASE does not appear on the handset
screen after a few seconds, remove the handset and place it in the
telephone base or charger again.
On the telephone base, press and hold FIND HANDSET for about four
2.
seconds (until the red IN USE light on the telephone base turns on) and
then release the button. The handset shows PLEASE WAIT... and it takes
about 10 seconds to complete the registration. The handset shows
HANDSET X REGISTERED (X represents the handset number assigned)
and you hear a beep when the registration completes.
n
Notes:
If the registration fails, the handset shows NOT REGISTERED. To reset
the handset, remo�e the handset from the telephone base and place it
back in. Try the registration process again.
You cannot register a handset if any other system handset is in use.
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

43-330

Table of Contents