Removing Your Mask - ResMed AirFit F10 User Manual

Removing your mask

Refer to the removal illustrations section in this guide.
Removal steps
1. Disconnect one or both of the lower headgear straps from the hook.
9. Pull the mask away from your face and back over your head.
Disassembly
Refer to the disassembly illustrations in this guide.
Disassembly steps
1. Unhook the upper headgear straps from the frame. There is no need
to undo the fastening tabs.
10. Remove the elbow from the mask by pressing the side buttons and
pulling the elbow away. Remove the elbow from the air tubing.
11. While holding the bottom of the hook, pull the corner of the frame
slightly away from the side of the mask.
12. Remove the frame from the rest of the mask.
13. If the soft sleeves are fitted, remove them by pulling them off of the
frame.
Reassembly
Refer to the reassembly illustrations in this guide.
Reassembly steps
1. Press the top of the frame onto the rest of the mask, ensuring it
clicks into place.
14. Press the bottom corners of the frame onto the rest of the mask,
ensuring they click into place.
15. To fit the optional soft sleeves, pull them over the upper arms of the
frame.
16. Attach the top headgear straps to the frame by looping through each
of the upper headgear hooks. Ensure that the ResMed logo on the
headgear is facing outward and right side up.
17. Attach the elbow to the air tubing. Attach the elbow and air tubing to
the mask by pressing the side buttons and pushing the elbow into the
mask. Pull on the elbow to check that it sits securely in the mask.
4