Appendix A Networking Connection; 10/100Mbps, 10/100Base-Tx - Planet FSP-804P User Manual

Appendix A Networking Connection

A.1 10/100Mbps, 10/100BASE-TX
When connecting Switch to another Fast Ethernet switch, a straight-through or
crossover cable might be necessary. Each port of the Switch supports auto-MDI/
MDI-X detection, meaning you can directly connect the Switch to any Ethernet
devices without making a crossover cable. The following table and diagram show
the standard RJ45 receptacle/connector and their pin assignments:
Contact
Media Dependent Interface
1
2
3
4, 5
6
7, 8
The standard cable, RJ45 pin assignment
RJ45 Connector pin assignment
MDI
Tx + (transmit)
Tx - (transmit)
Rx + (receive)
Rx - (receive)
The standard RJ45 receptacle/connector
MDI-X
Media Dependent Interface-Cross
Rx + (receive)
Rx - (receive)
Tx + (transmit)
Not used
Tx - (transmit)
Not used
23