Led Colours - Alcatel-Lucent 8340 Installation Manual

Alcatel-Lucent 8340 Smart IP-DECT AP
Installation Manual
Lower LED – Red/Green
This LED is used to indicate the start-up and network status.
LED Status (lower LED,
Red/Green)
RED Steady on
RED flashing
Green flashing
Off
Table 2. Lower LED status on the 8340 Smart IP-DECT AP.
5.2

LED Colours

The colour of the top LED might be different depending on the operational mode. The
following operational modes are distinguished:

Normal (single band) mode
In the normal single band mode, the top LED will be Yellow.

Dual Band Mode
In Dual Band mode, the LED colour shows the operational frequency:

Green :

Red :
8AL90850USBAed01
Meaning
Power but FPGA starting up
Trying to connect to the network
Network status display and showing network activity
8340 Smart IP-DECT AP operational
Europe/International
North America / USA
25