Table of Contents
Advertisement
Alcatel-Lucent 8340 Smart IP-DECT AP
Installation Manual
3
MOUNTING THE G.729 DAUGHTERBOARD
Follow the step-by-step procedure below, to install the G.729 daughter board.
PROCEDURE: "Installing the G.729 Daughter Board".
Actions
1.
Make sure that you have the G.729 Daughter board.
2.
Open the cabinet. Use steps 1 and 2 in Chapter
3.
Take the PCB out of the cabinet.
Note: Mind the light conductor for the LEDs. It can drop off!
4.
Now you should have the 8340 Smart IP-DECT AP PWB and the G.729 Daughter
Board as separate items.
5.
Remove the protection foil from the sticky part on the G.729 Daughter Board.
8AL90850USBAed01
Figure 9. Light conductor for LEDs
2 .
LED Light conductor
19
Hide quick links:
Advertisement
Table of Contents
