Stopping, Pausing, Or Restarting; Drying And Cycle Tips - Whirlpool cabrio W10164751A Use & Care Manual

Stopping, Pausing, Or Restarting; Drying And Cycle Tips - Whirlpool Cabrio W10164752A Use & Care Manual [Page 16]
Adjust Dryness.
NOTE: Dryness selections can be made only while using
Automatic Cycles.
How the AccelerCare
Moisture-sensing strips and temperature sensors inside the
dryer drum monitor how fast the load is drying, how hot the air
should be and when clothes are dry. The system automatically
stops the cycle to help save time and avoid overdrying.
To use a Timed Cycle
Turn knob to desired Timed Cycle.
Press the TIME ADJUST up or down arrows until the
desired drying time is displayed. Press the up or down
arrows and the time will change by 1-minute intervals.
Press and hold the up or down arrows and the time will
change by 5-minute intervals.
NOTE: The Time Adjust features can be used only with
the Timed Dry and the Enhanced Touch Up cycles.
Press TEMP until the desired temperature illuminates.
NOTE: The Temp feature can be used only with the Timed
Dry and the Enhanced Touch Up cycles.
NOTE: During the Timed Dry Cycle, you can change the
//static-data2.manualslib.com/manual/190510/Whirlpool-Cabrio-W10164752a.html?page=16 (2 of 7)3/24/2018 10:30:50 PM
Drying System Works
®
Press the TIME ADJUST up or down arrows until the desired
drying time is displayed. Press the up or down arrows and
the time will change by 1-minute intervals. Press and hold
the up or down arrows and the time will change by 5-minute
intervals.
NOTE: The Time Adjust features can be used only with
the Timed Dry and the Enhanced Touch Up cycles.
Press TEMP until the desired temperature illuminates.
NOTE: The Temp feature can be used only with the Timed
Dry and the Enhanced Touch Up cycles. Only the Medium
and High temperature settings can be used for the
Enhanced Touch Up Cycle.
NOTE: During the Enhanced Touch Up cycle, you can change
the settings for Time Adjust and Temp. Open the door or press
PAUSE/CANCEL once to pause the cycle, or press PAUSE/
CANCEL twice to cancel a cycle.

Stopping, Pausing, or Restarting

To stop or pause your dryer at any time
Open the door or press PAUSE/CANCEL once. Press PAUSE/
CANCEL twice to cancel a cycle.
To restart the dryer
Close the door. Press START until dryer starts.
NOTE: Drying will continue from where the cycle was interrupted
if you close the door and press Start within 5 minutes. If the cycle
is interrupted for more than 5 minutes, the dryer will shut off.
Select new cycle settings before restarting the dryer.

Drying and Cycle Tips