Changing Cycles And Options; Status Lights; Pausing Or Restarting - Whirlpool Duet Sport WFW8300SW Instruction Manual

• Liquid detergent: Measure the amount of
liquid detergent with the measurement de-
vice which comes with the detergent. Add no
more than the manufacturer's recommended
amount. The liquid detergent flows immedi-
ately into the washer.
• Powdered detergent: Measure the amount of
powdered detergent with the measurement
device which comes with the detergent. Add
no more than the manufacturer's recom-
mended amount.
NOTE: Overfilling could cause an oversudsing
condition.
Chlorine bleach compartment
(Letter C in Dispenser Illustration)
Add NO MORE THAN 2/3 cup (160 mL) liquid
chlorine bleach to this compartment. The bleach
will be automatically diluted and dispensed
at the best time during the first rinse after the
wash cycle. This compartment cannot dilute
powdered bleach.
• Use only liquid chlorine bleach in this dis-
penser. Do not use this dispenser to add
powdered chlorine or any form of colorsafe
bleach to your load.
• Always measure liquid chlorine bleach. Use
a measuring cup with a pour spout; do not
guess. Follow the manufacturer's directions
for proper use.
• Do not fill beyond the "MAX" level.
NOTE: Overfilling could cause garment dam-
age.
Fabric softener compartment
(Letter D in Dispenser Illustration)
Add 1/4 cup (60 mL) liquid fabric softener to
this compartment. Fabric softener will be auto-
matically dispensed in the final rinse or in the
EXTRA RINSE, if selected.
• Do not fill beyond the "MAX" level.

PAUSING OR RESTARTING

1. To pause the washer at any time, select
PAUSE/CANCEL.
2. To continue the cycle, select and hold
START (for approximately 1 second).

CHANGING CYCLES AND OPTIONS

Not all Options are available with all Cycles.
Cycles and Options can be changed anytime
before START is selected.
To stop a cycle and select a new cycle
1. Select PAUSE/CANCEL once.
2. Select desired cycle.
3. Select the desired OPTIONS.
4. Select and hold START (for approximately
1 second) to restart the washer at the
beginning of the new cycle.
To cancel a cycle
1. Select PAUSE/CANCEL twice.
2. The washer powers down, the door un-
locks, and clothes can be removed.
NOTE: If the water level or the temperature is
too high, the washer will drain automatically
before the door unlocks.
To change Options after the cycle has
started
1. Select PAUSE/CANCEL once.
2. Select the desired OPTIONS. If the option
is not available, the machine will beep.
3. Select and hold START (for approximately
1 second) to continue the cycle.
To drain the washer manually
1. Select PAUSE/CANCEL.
2. Select DRAIN/SPIN.
3. Select and hold START (for approximately
1 second) to begin the drain.
4. When the spin is complete, the door
unlocks. Items can be removed from the
washer.

STATUS LIGHTS

These lights show which portion of the cycle the
washer is operating. They also indicate when
you can add an additional item to the wash
cycle and when the controls are locked.
3-6